powerking
product list
product search
 01.Power Supply >> CCTV Adaptor >> DC 24V 80W power adaptor PKCDC24V80W
 
  DC 24V 80W power adaptor PKCDC24V80W
Product Name:DC 24V 80W power adaptor PKCDC24V80W
Product S/N:122622275516
Specification:DC24V80W
Product Feature:CE&RoHS,IC,SMD technology,regulated
Product Class:01.Power Supply
Quality Rank:
Chat with us:Click to chat via msnClick to chat via skype
Email:Welcome to contact me for the CCTV power supply business!
    Product Description
直流24V80W电源适配器PKCDC24V80W
Certificates:UL,CE&RoHS
1、描述(SCOPE):
格书适应于     24V3.3A    型号的适配器。
   The purpose of the document is to specify the functional requirements of a 79.2W switching power supply.
2、输入特性(INPUT CHARACTERISTICS):
   2.1输入电压(Input Voltage):
     额定电压(Nominal Voltage):100-240Vac
     调整范围(Variation Range):90-264Vac
2.2输入频率(Input Frequency):
     额定频率(Nominal Frequency):50/60Hz
     调整频率(Variation Frequency):47-63Hz
2.3输入电流(Input Current):
当输入交流电压为额定值的下限时,输出电压负载满载,最大输入交流电流1.8A。
1Arms max At any input voltage and rated, DC output rated load.
2.4浪涌电流(Inrush Current):
当输出为额定负载,环境温度为25℃,输入240Vac冷态起动电源时的最大浪涌电流小于30A。
30Amps Max. Cold start at 240Vac input, with rated load and 25℃ambient.
2.5 AC漏电流(Ac Leakage Current):
当输入电压240Vac时,最大漏电流为0.25mA。
0.     25mA Max At 240Vac input.
3、输出特性(OUTPUT CHARACTERISTICS):
3.1输出功率(Power Output);
      电压       最小负载     最大负载    峰值电流    输出功率
     Voltage      Min. Load     Max. Load    Peak       Output Power
     +24Vdc        0.1A         3.3A        4A         79.2W
3.2负载特性/调整率(Combined Load/Line Regulation):
      电压   最小空载电压  最大空载电压      线性调整      负载调整
     Voltage  Min. Voltage    Max. Voltage     Line Regulation   Load Regulation
     +24Vdc       23.5V       24.5V          ±5%            ±5%
3.3波纹和噪音(Ripple And Noise):
测试条件:任何负载正常工作下,使用示波器带宽为20MHz连接到充电器的输出端,同时输出端并连一个47uF的电解电容和一个0.1uF的瓷片电容。
    The ripple and noise are as follows when measure with Max. Bandwidth of 20MHz and Parallel 47uF/0.1uF,crossed connected at testing point.
 
                 电压            最大波纹最大噪音
                Voltage          Ripple And Noise(Max.)
+24Vdc            120mVp-p
 
3.4启动延迟时间(Turn On Delay Time):
      当输入115Vac和输出最大负载时,最大启动时间为2S。
      2 second Max. At 115Vac input and output Max. Load.
3.5上升时间(Rise Time):
      当输入115Vac和输出最大负载时最大时间为40mS。
      40mS Max. At 115Vac input and output Max. Load.
3.6保持时间(Hold Up Time):
      当输入115V和输出最大负载时,最小保持时间为5mS。
      5mS Min. At 115Vac input and output Max. Load.
3.7效率(Efficiency):
      当输入100Vac和输出最大负载时,最小80%。
      80%Min.At 100Vac input and output Max. Load.
      当输入240Vac和输出最大负载时,最小83%。
      83%Min.At 240Vac input and output Max. Load.
3.8过冲(Overshoot):
      在电源开启或关闭的时候,最大15%。
      15%Max.When power supply at turn on or turn off.
4、保护功能(PROTECTION REQUIREMENT):
4.1短路电路保护:
      Short Circuit Protection:
      该电源供给器在短路解除时,能正常工作恢复。
The power supply will be auto recovered when short circuit faults remove.
4.2过流保护(Over current Protection):过流故障排除后,电源将自动恢复正常工作。
      The power supply will be auto recovered when over current faults remove.
4.3过压保护(Over Voltage Protection)
      当输出电压超过额定电压时,电源将保护,故障排除后能恢复正常工作。
The power supply will not be auto recovered when faults remove.
 
5、环境要求(ENVIRONMENTAL REQUIREMET):
5.1工作温度(Operating Temperature):
     0℃~ 40℃,满载,正常工作(Full load Normal operation)。
     0℃to40℃,Full load Normal operation.
5.2储存温度(Storage Temperature):-20℃to40℃,带外壳(With package).
5.3工作湿度(Relative Humidity):
      5%(0℃)~90%(40℃),72小时,满载,正常工作
      5%(0℃)~90%(40℃)RH,72Hrs,Full load Normal operating.
5.4振动(Vibration):
      1、测试标准:国际电工电子委员会  Operating: IEC 721-3-3 3M3
        5~9Hz,A=1.5mm 加速度(9~200Hz,Acceleration 5m/s2)                                                                                                                                                                                                                                        2、运输(Transportation): IEC 721-3-2 2M2
        5-9Hz,A=3.5mm
        9~200Hz,加速度Acceleration=5m/S2
        200~500HZ,加速度Acceleration=15m/S2
3、轴向振动(Axes,10 cycles per axis).
     在测试过程中不能出现永久性的损坏。
No permanent damage may occur during testing.
在电源开启和关闭后,样机能够恢复到最初条件。
 The product has to restors its original situation after power off/on.)
5.5跌落试验(Dropping)(Packed):
 一个角,三个棱, 六个面。
1 corner,3 edges, and 6 surfaces
高度76m  Height:76cm
6、安全及EMC要求(SAFETY AND EMC REQUIREMENT):
6.1安全:符合UL标准
6.2高压(DIELECTRIC STRENGTH)(H-Pot):
    ()Primary to secondary),3000Vac/5mA/60s.
7、结构参数(MECHANICAL REQUIREMENT)
产品尺寸:140*60.5*35MM
重量:0.38KG/PC
AC线:0.12KG/PC

plastic shell dimension:6*14*4cm
white paper box dimension:10*15*4cm
weight:0.52kg
Hits:70781  AddTime:2010-12-26 [Print] [Close]